1. <tbody id="jnkz7"></tbody>

          <tbody id="jnkz7"><nobr id="jnkz7"></nobr></tbody>

            1. <menuitem id="jnkz7"><optgroup id="jnkz7"><thead id="jnkz7"></thead></optgroup></menuitem>
              <tbody id="jnkz7"></tbody>

              高精度組合切割砂輪High Precision Gang Saw Blades

              • 發布時間:2021-01-01
              • 瀏覽:

              高精度組合切割砂輪High Precision Gang Saw Blades(圖1)

              高精度組合切割砂輪High Precision Gang Saw Blades(圖2)

              主要應用領域

              主要應用于光學玻璃、石英、玻璃管、陶瓷、寶石、陶瓷套管、磁性材料、工具鋼、軸承鋼、硬質合金、電子元件等的高效切斷或切槽。

              Application

              Mainly used for cutting off and slotting optical glass,quartz, glass tube, ceramic, gems, ceramic pipes, magnetic materials, tool steel, bearing steel, carbide, electronic component and so on.

               

              產品概述:

              高精度組合切割砂輪是指將多片(一般為2 ~ 41 片)金屬結合劑或樹脂結合劑高精度超硬材料切割砂輪、隔片、法蘭與砂輪軸精密組裝成一體的多刀切割工具。

              Product overview

              High precision gang saw blades are constituted by many pieces metal bond or resin bond high precision dicing blades,spacers,flange and spindle.

               

              規格型號:

              Z1A8、Z1A1、Z1A1R。

              Specification

              Z1A8、Z1A1、Z1A1R.

               

              主要特點:

              組刀切割,大幅度提高切割效率;

              砂輪外圓消耗及工件切割品質一致性佳;

              配方豐富,可滿足對不同材料的切割需求;

              先進的機加工與裝配調試工藝保證組刀尺寸、形位高精度。

              Main features

              Gang saw cutting could improve efficiency.

              The consumption of cylindrical and the cutting quality is good.

              Various formulas can meet different cutting requirements for various materials.

              Advanced machining and processing ensure the size and shape and position accuracy.

               

              訂貨須知:

              初次訂貨時,請您提供以下參數,便于我們協助您選擇最適合的切割砂輪。

              型號:1A8、1A1、1A1R、3A1、14A1、1B1、1E1 等。

              規格尺寸:磨料、粒度、結合劑,外徑、厚度、內徑、磨料工作層寬度、基體厚度等。

              用途:工件名稱、切割尺寸、切割材料;切槽、切斷等。

              使用條件:機床、砂輪速度、進給速度、切割深度;干式切、濕式切等。

              切割要求:切割精度、崩口要求、加工表面完整性等。

              特殊要求:是否組刀使用、樹脂切割砂輪是否需要導電、

              切割砂輪外圓是否帶水槽、水槽尺寸數量、1A1 型切割砂輪基體外側面是否有排屑槽等。

              Order guideline

              For first order, please provide the following parameters so as to select the most suitable cutting wheels.

              Types: 1A8, 1A1, 1A1R, 3A1, 14A1, 1B1 and so on

              Specification: Abrasive type, grit, bond type, outer diameter, thickness, inner diameter, work layer width,steel plate thickness and so on.

              Usage: The work piece, cutting size, cutting material,grooving or cutting off and so on.

              The application conditions: The machine, the rotational speed, feed speed, cutting depth, dry or wet cutting and so on.

              Cutting requirement: Cutting precision, chipping request,superficial integrity and so on.

              Special requirement: for example: Whether gang saw use, whether the resin bond cutting wheel needs electric conduction,

              whether there are water slots on the periphery of cutting wheel, number and specification of the water slots,whether 1A1 type cutting wheel with steel plate has slots for removing chips on the outer profile and so on.

               

              使用注意事項:

              1. 在切割砂輪裝機前請仔細檢查,如果有缺口或其它破損,請停止使用。

              2. 當切割砂輪標有旋轉方向時,要與機床回轉方向一致。相反則切割不鋒利,難以發揮切割砂輪的性能。

              3. 切割過程中若發現異常,應立即停機,排查原因。

              4. 當切割不鋒利時,要對砂輪及時修整開刃,否則會出現過熱、超負荷而使砂輪破損的可能。

              5. 砂輪回轉中,嚴禁使用手持工具進行切割,更不能將手或其他身體部位直接接觸砂輪。

              6. 切割砂輪嚴禁用于切槽或切斷以外的作業,避免因受力不均而發生異常。

              Attention

              1.Before installing cutting wheels, please carefully inspect and confirm the cutting wheel has no distortion,crack, rip and so on.

              2.When the cutting wheel has a sign of rotation, it must be consistent with rotation direction of the machine.

              Otherwise it cannot cut sharply and it is difficult to bring the performance of the cutting wheel into play.

              3.If abnormity appears in the process, it should be immediately stopped.

              4.When cutting wheel is not sharp, you must dress the cutting wheel. Otherwise, it will lead to overheat and overloading which will cause the cutting wheel to damage.

              5.When rotating, it is strictly prohibited to control with hand and touch the cutting wheels with body.

              6.The cutting wheels are only used for grooving and cutting off. Otherwise it is easy to cause abnormity because of uneven stress.

              掃一掃,關注我們

              服務熱線

              400-6608-121

              Copyright ? 2018-2019 鄭州磨料磨具磨削研究所有限公司 All rights reserved 版權所有 Powered by EyouCms

              營業執照公示

              豫ICP備05008669號-1

              浙江双彩网 浙江双彩网官网,浙江双彩网平台,浙江双彩网网址,浙江双彩网app,浙江双彩网下载,浙江双彩网开户,浙江双彩网注册,浙江双彩网登录,浙江双彩网购彩,浙江双彩网在线投注,浙江双彩网手机版,浙江双彩网邀请码,浙江双彩网购彩平台,浙江双彩网计划,浙江双彩网走势图,浙江双彩网最长的龙多少期,浙江双彩网预测,浙江双彩网正版下载,浙江双彩网直播,浙江双彩网怎么玩,浙江双彩网怎么稳赢,浙江双彩网规律,浙江双彩网技巧,浙江双彩网开奖结果,浙江双彩网开奖规律,浙江双彩网比分 浙江双彩网版权所有